response time simulation
英 [rɪˈspɒns taɪm ˌsɪmjuˈleɪʃn]
美 [rɪˈspɑːns taɪm ˌsɪmjuˈleɪʃn]
【计】应答时间模拟
双语例句
- To analyze the wind-induced dynamic response of offshore wind turbine in time domain, the numerical simulation of fluctuating wind velocity time series was studied.
为了分析海上风机结构在时域内的风振动力反应，进行了脉动风速时程数值模拟研究。 - The response time of system shows sluggish in the simulation results.
仿真结果表明，RED算法对网络的拥塞变化反应较缓慢。 - In addition, the mean response time of temperature is much longer than the flow time scale of a typical turbulent combustion field, which demonstrates the importance of unsteadiness in the numerical simulation of turbulent combustion s.
另外，温度的平均响应时间远大于一个典型湍流燃烧场的流动时间尺度，说明火焰面非稳态效应对于湍流燃烧数值模拟有重要意义。 - The wind vibration response of the highrise structure must analysis in the time history if taking the nonlinear into acount, so we must develop the simulation method the along-wind impulsive wind.
高耸结构的风振响应要考虑非线性就必须在时域内进行，这就要发展顺风向脉动风的模拟方法。 - By applying the ADRC to the structural seismic response control of the system with the input time delay, the simulation proves that the ADRC is feasible to damping the structural seismic response.
通过自抗扰控制器在输入含有时滞的结构减振控制中的应用，仿真结果表明对输入含时滞时结构减振控制效果明显，自抗扰控制器对时滞系统的控制是可行的。 - Based on the study of remote parameter control ( RPC) method and time domain control method, multi channel inverse control method using adaptive finite impulse response filters are applied to a road simulation testing system in order to accurately reproduce the desired response.
在研究RPC（RemoteParameterControl）方法和时域控制方法的基础上，提出了采用自适应FIR（finiteimpulseresponse）滤波器的多通道逆向控制方法来控制道路模拟试验系统，以精确再现期望的响应信号。 - The necessity and feasibility of system simulation method used for society earthquake response analysis is discussed. The combined model of field domain and time domain for the simulation purpose is set up.
讨论了用系统仿真手段分析地震灾场的必要性和可能性，建立了地震灾场仿真分析的场、时域复合模型； - Secondly, the Worst Case Response Time of the simulation tasks are analyzed based on Markov chains and the schedulability analysis rules for simulation task are presented.
而后，基于Markov链对仿真任务的最坏反应时间进行了分析，并提出了仿真任务的可调度性分析规则； - It is verified that the network convergence and application response time can satisfy the system requests through the practice and matching simulation.
实践和仿真实验证明系统能够满足网络收敛和应用响应时间要求。 - Collision detection and collision response between moving objects is considered a major computational bottleneck in virtual environment, and its time consuming can not accepted in engineering application, for example, assemble simulation witch is accurate and real time between complicated objects.
运动对象间的碰撞检测和碰撞响应一直是可视化虚拟环境中主要的计算瓶颈，对于大型复杂对象进行精确、实时的装配仿真等工程应用中，其时间的开销是无法忍受的。 - The Worst-Case Response Time Analysis for Distributed Simulation Task
分布式仿真任务的最坏反应时间分析 - A new decoupling scheme is discussed, the comparison of the control performance of the new scheme with the old ones focused on response time and robustness is given out through both theoretical analysis and computer simulation.
就一种新的解耦算法，从动态响应、抗参数变化、弱磁区转矩响应等方面，借助理论分析和计算机仿真，与现有的解耦算法进行比较。 - Dynamic stress intensity factor impulse response curves are obtained. The dynamic initial fracture time, tf, can be received by RKR local stress fracture criterion. The material dynamic fracture toughness is successfully obtained from numerical simulation.
起裂时问通过RKR局部应力断裂准则获得，结合计算得到的动态应力强度因子冲击响应曲线，最终得到材料动态断裂韧性，并验证了其有效性。 - After theoretical analysis of response time, power consumption under Poisson process traffic condition, we give the simulation experiment.
从理论上分析了LIA算法在泊松过程业务背景下的响应时间、功率消耗等性能，并结合仿真实验验证了理论分析结果。 - Through loading step by step, the effect of gravity for seismic response is considered for the first time, which makes the numerical simulation result closer to the actual response of the tunnel.
首次采用了分步加载方法，考虑了地震工况中重力场的影响，以使数值模拟结果更接近隧道实际地震响应情况。 - The purpose of using the truncated singular value decomposition transformation is to reduce amount of calculation, filter out redundant mathematical calculations and improve search response time. Finally, with the help matlab simulation tool, the thesis conducts comparative analysis of three kinds of weighting calculation schemes.
使用截断奇异值分解变换的目的是能降低计算量，过滤掉冗余的数学计算，提高搜索响应时间。最后，借助matlab仿真工具，对三种权重计算方案进行比较分析。